• Intelligent space perception, path planning, pumping, levelling, plastering, pressing and closing in a fully automatic sequence
• Plastering pressure: 30 kg for superior adhesion to ensure no empty drums
• Speed: 3 minutes/coat; Efficiency: Up to 700 m²/day (5-10 x manual)
• Achieves perfect flatness with ±0.015° vertical deviation correction
• “Three-Spray in One Station” for simultaneous left, center and right column spraying from a single position
• Innovative front-mounted 4-axis robotic arm reaching irregular areas to achieve ≥95% coverage
• Efficiency: 120 m²/hour (putty); 200 m²/hour (latex paint)
• Capacity/coat: 200 m² (putty); 300 m² (paint)
• Intelligent cleaner for glass curtains, enhancing efficiency, quality and safety Identification and removal of stains, with spray, wipe, and rinse cycles
• Avoidance of obstacle of up to 200 mm; vertical distance per sector 150 m; track-changing for multi-panel/ multi-sector navigation on tall buildings
• Efficiency: 60-100 m²/h at speed >0.5 m/s; cleaning coverage: ≥95%
• Higher efficiency, mobility, reliability and safety in transportation and installation of prefabricated ALC/AAC wall panels
• Move, grasp, lift, rotate and install wall panels up to 6 m long at 400 kg
• Transporter load capacity ≤1200kg on all-directional swerve platforms
• Installer efficiency: ≤10 mins/panel with 3 workers, ≥40% higher than manual
• High-precision laser measurement for millimeter-level precision
• Advanced GNSS navigation system for accurate positioning, with remote control mode for manual oversight in complex environments
• Net construction efficiency: 160 m²/h; max. driving speed: 0.5 m/s;
• Navigation accuracy: ±120 mm; max. climbing angle: 10°
• Automatic transfer of CAD/BIM designs to site for accurate ground markings
• Real-time scribing and marking with obstacle avoidance for safe site
navigation
• Centimeter-level transfer accuracy, capable of complex geometries
• Moving speed: ≤0.5 m/s; positioning accuracy: ±5 cm
• SLAM-navigation, visual positioning and intelligent glue-spreading with vibration prevention for seamless alignment and accurate levelling
• From 600×600 to 1200×600 mm tiles, staggered pattern also supported
• Speed while paving: 25-100 mm/s; speed with no-load: ≤0.5 m/s
• Efficiency: 15-18 m²/h (~40 sec/tile, 4-6 x manual)
• Complete tying work at mm-level precision, at 99.6% success rate
• Autonomous recognition and positioning of rebar nodes, automatic obstacle avoidance and track changing
• Efficiency: ≥500 nodes/h (2-3 x manual), with rebar spacing 100-300 mm
• 25×32 mm to 40×40 mm for two-rebar node, or total diameters from 57 mm to 100 mm for nodes with multiple rebars
• Removing laitance, grinding of fresh concrete or cement screeds to prepare surfaces for tiling or coating
• Intelligent dust suction and path optimization for clean, efficient operation.
• Efficiency: 50-100 m²/h; dust suction capacity: 100 L
• Working height: ≤3.2 m; surmountable obstacle: ≤20 mm; trench width: ≤50 mm
• Capture 3D images, thermal maps, noise levels and other pertinent data of
construction sites or other designated premises
• Make extensive use of DJI drones, cameras and other IoT devices and sensors
• Sophisticated AI and Machine Learning algorithms to detect, identify, analyze and generate project progress updates, real-time safety warning or risk alerts, management reports etc. based on specific requirements
• A compact handheld 3D laser scanner for efficient spatial data capture
• Combine 24MP RGB cameras, 360° tilted LiDAR, built-in IMU and RTK modules
to generate colorized point clouds in real-time with
mm-level accuracy
• Live pre-view with intuitive UX on magnet-mounted cell phone
• All-in-1 point cloud processing tool for data optimization and editing
• Wall flatness, levelness and verticality measurements and data captures
• 1000 mm or 2000 mm in length, with 8-sensor fusion technology to improve
measurement efficiency by 55%, recording productivity by 50%
• Range: flatness 0 – 100 mm, slope 0 – 2000 mm/m, angular 0° – ± 90°
• Accuracy: flatness ± 0.2mm, slope ± 0.05 mm/m, angular ± 0.05°
• Specialize in sand table models, handcrafted art and digital visual models for construction companies, real-estate builders and developers
• Creative design and superior craftsmanship to create aesthetic and artistic, functional and impactful models, using diverse materials and lighting
• Utilize 3D printing and 3D visualization for interactive and immersive experience